RF switches to select low level RF signals (as from an antenna array) provides for multiple RF sources to be transferred to a common RF o/p feed.
The amplifier is available with options to power the device via the RF feeder from a bias T network, or by a direct feed from local power supply.
Optional power bypass is available for use as an amplified “Bias T” if required.
The amplifiers couple directly to the antenna connector to maintain low noise performance.
Environmentally sealed to IP 65, they are ruggedly designed to withstand extremes of temperature and weather.
Specification 13 Way
Specification 8 Way
Isolated BCD controlled selection
High isolation RF switch
Integrate low Noise Amplifier
50 Ω Cable driver
100MHz – 3500 MHz
Insertion gain + 9 dB typical
12 volts dc input supply
SMA input/output RF connections
Isolated BCD controlled selection
High isolation RF switch
Integrate low Noise Amplifier
50 Ω Cable driver
100MHz – 2500 MHz
Insertion gain + 8 dB typical
12 volts dc input supply
SMA input/output RF connections
