main  
m1 m2 m3 m4 m5 m6
   

Microwave Video Links | GPS Applications | Video Engineering | Custom Electronic Design

 
 
GPS Products:
Telenav II
CamNav
VideoTag
GIS
R&D Projects
 
GPS Applications:
ARINC429 to NMEA 0183 Translator
GPS Heading Sensor Evaluation Unit
GPS Data Module and Encoder
GPS Antenna Splitter – Diplexer
Quad GPS Antenna Splitter
 
NEW ITEMS:
GPS Compass OEM interface
GPS Compass - Target Location Module
GPS Compass Module

GPS Heading Sensor Evaluation Unit

The GPS Heading Sensor evaluation system uses the Crescent © GPS heading reference engine interfaced with an isolated dc/dc power converter and dual port RS232 driver.
The user interface also provides filtered and current limited antenna power for the GPS antennas used to derive heading from the GPS satellites. By simultaneous and coincident constellation tracking, two receivers with common processing derive the local GPS position, differential GPS corrections and heading with respect to true (geographic) north.
By using high precision differential carrier phase measurements heading accuracies to better than 0.5 degrees can be achieved with antennas separated on a 1 meter base line.

For dynamic applications tilt and turn rate sensing (gyro) aiding is included, configured by user commands.

Interface Specification:  
GPS Antennas
Separation 0.4 to 2 meter base line)
Connections
SMA
Power
9 to 16 volts dc (0.25 Amps max)
Interface
Port A RS232 configurable baud rate – preset 4,800 baud
(NMEA Messages $GPGGA, VTG, ZDA, RMC, GSV & $HEHDT,$HEROT)
Port B RS232 configurable baud rate – default 19,200
(NMEA Messages $GPGGA, VTG, ZDA, RMC, GSV & $HEHDT,$HEROT + Binary data)

Connectivity
 
Port A: 9-Way D Plug
Port B: 9-Way D Socket
1. +dc supply input
1. +dc supply input
2. Tx - Port A
2. Tx - Port B
3. Rx - Port A
3. Rx - Port B
4. Feed through to Port B pin 4
4. Feed through to Port A pin 4
5. Common (data)
5. Common (data)
6. Power return (-ve)
6. Power return (-ve)
7. Feed through to Port B pin 7
7. Feed through to Port A pin 7
8. Feed through to Port B pin 8
8. Feed through to Port A pin 8
9. Feed through to Port B pin 9
9. Feed through to Port A pin 9
pdf